Qlogic SANbox 5000 Series Interface Guide

14 – Command Reference
Show Config Zoning
59183-02 A 14-121
A
Show Config Zoning
Displays zoning configuration parameters for the switch.
Authority None
Syntax show config zoning
Examples The following is an example of the Show Config Zoning command:
SANbox #> show config zoning
Configuration Name: default
-------------------
Zoning Configuration Information
--------------------------------
MergeAutoSave True
DefaultZone Allow
DiscardInactive False

Qlogic SANbox 5000 Series Specifications

General

Brand	Qlogic
Model	SANbox 5000 Series
Category	Switch
Language	English