Qlogic SANbox 5000 Series Interface Guide

6 – Port Configuration
Displaying Port Information
6-2 59183-02 A
S
6.1.1
Port Configuration Parameters
Enter the Show Config Port command to display the port configuration
parameters. These parameters determine the operational characteristics of the
port. Refer to Table 14-16 for a description of these parameters.
SANbox #> show config port 3
Configuration Name: default
-----------------------------
Port Number: 3
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port3
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
AutoPerfTuning False
LCFEnabled False
MSEnabled True
NoClose False
IOStreamGuard Disabled
VIEnabled False
MFSEnabled True
PDISCPingEnable True

Qlogic SANbox 5000 Series Specifications

General

Brand	Qlogic
Model	SANbox 5000 Series
Category	Switch
Language	English