14 – Command Reference
Set Setup Radius
14-98 59183-02 A
S
DeviceAuthServer Enable (True) or disable (False) this server for device authenti-
cation. The default is False.
UserAuthServer Enable (True) or disable (False) this server for user account
authentication. A user authentication RADIUS server requires a
secure management connection (SSL). The default is True.
AccountingServer Enable (True) or disable (False) this server for auditing of activity
during a user session. When enabled, user activity is audited
whether UserAuthServer is enabled or not.The default is False.
The accounting server UDP port number is the ServerUDPPort
value plus 1 (default 1813).
Timeout Number of seconds to wait to receive a response from the
RADIUS server before timing out. The default is 2.
Retries Number of retries after the first attempt to establish communica-
tion with the RADIUS server fails. The default is 0.
SignPackets Enable (True) or disable (False) the use of sign packets to pro-
tect the RADIUS server packet integrity. The default is False.
Secret 22-byte ASCII string used as a password for authentication pur-
poses between the switch and the RADIUS server.
Table 14-23. RADIUS Service Settings (Continued)
Entry Description
To Next Page
Loading...
Need help?
General
