14 – Command Reference
Show Port
14-144 59183-02 A
S
LIP_F7_F7 A loop initialization primitive frame used to acquire a valid
AL_PA.
LIP_F8_F7 A loop initialization primitive frame used to indicate that a loop
failure has been detected at the receiver.
Login Number of device logins
LoginStatus Login status
Logout Number of device logouts
LongFramesIn Number of incidents when one or more frames are received
that are greater than the maximum size.
LoopTimeouts A two (2) second timeout as specified by FC-AL-2.
LossOfSync Number of synchronization losses (>100 ms) detected by this
port. A loss of synchronization is detected by receipt of an
invalid transmission word.
LostFrames Number of incidents of lost frames.
Lost RRDYs Number of incidents of lost R_RDYs.
MaxCredit Maximum number of port buffer credits
MediaSpeeds Possible transmission speeds
MediaPartNumber Transceiver vendor part number
MediaRevision Transceiver revision
MediaType Transceiver type
MediaVendor Transceiver manufacturer
MediaVendorID Transceiver manufacturer identifier
OperationalState Operational state
PerfTuningMode AutoPerfTuning status
PortID Fibre Channel port address
PortWWN World wide port name
PrimSeqErrors Primitive sequence errors detected.
RunningType Operational port type
RxLinkResets Number of link reset primitives received from an attached
device.
Table 14-30. Show Port Parameters (Continued)
Entry Description
To Next Page
Loading...
Need help?
General
