5 – Switch Configuration
Setting the Date and Time
5-18 59183-02 A
S
Enter the Set Timezone to change the time zone as shown in the following
example:
SANbox (admin) #> set timezone
Africa America
Antarctica Asia
Atlantic Australia
Europe Indian
Pacific UTC
Press ENTER for more options or 'q' to make a selection.
America/Grenada America/Guadeloupe
America/Guatemala America/Guayaquil
America/Guyana America/Halifax
America/Havana America/Hermosillo
America/Indiana America/Indianapolis
.
.
.
America/Monterrey America/Montevideo
America/Montreal America/Montserrat
America/Nassau America/New_York
America/Nipigon America/Nome
America/Noronha America/North_Dakota
America/Panama America/Pangnirtung
Press ENTER for more options or 'q' to make a selection.
q
Enter selection (or 'q' to quit): america/north_dakota
America/North_Dakota/Center
Enter selection (or 'q' to quit): america/north_dakota/center
Enter the Date command to display the date and time as shown in the following
example:
SANbox #> date
Mon Apr 07 07:51:24 200x
Enter the Date command within an Admin session to set the date and time as
shown in the following example:
SANbox #> admin start
SANbox (admin) #> date 013110152025
SANbox (admin) #> date
Fri Jan 31 10:15:03 UTC 2025
To Next Page
Loading...
Need help?
General
