How to Display and Change to 'No Account with Access
Control' Mode
No Account With Access Control
• Postage usage is not tracked by account.
• User does not select an account when processing mail.
• A PIN number is required to access functions and process
mail.
• In this mode there is a shared System PIN Code.
To display and change the 'Account mode' to 'No Account with Access Control':
1. As supervisor (see How to Log in as Supervisor on page 207):
From the main menu, select the path: Account Management Account Mode
Selection
The Account Mode Selection screen is displayed with the current 'Account Mode'
shown.
2. Select 'No Account with Access Control'.
3. Press [OK] to confirm.
4. If required, enter the PIN code and press [OK].
The Mailing System then confirms that the 'Account Mode' has been changed.
126
| Page 126 | Jun-21-2021 12:11 |
6
Accounts and Access Control
To Next Page
Loading...
