quadient iX-5 - How to Fill the Automatic Label Dispenser

How to Fill the Automatic Label Dispenser
The Label Dispenser allows you to print postage on precut labels.
To fill the Label Dispenser:
1. Stack the labels and insert them in the dispenser, face to print on the right-hand
side and peel-off tab on the top.
2. Push the block of labels down until you feel the label “click” into position.
The Label Dispenser can hold up to 40 labels.
3
Processing Mail
91
| Page 91 | Jun-21-2021 12:11 |