quadient iX-5 - How to Edit; Modify a Job Memory

2. Select a line named None in the list.
3. Press [OK] to create a new job memory.
4. Select a PPI or a Normal imprint.
5. Enter the name of the new job memory, then press [OK].
6. Enter the preferences, press [OK] to validate and display the next list of parameters,
if any.
7. Repeat the previous step until the system displays the name of the new job memory
in the list.
8. You can modify any preference by using the Edit/Del function (see How to Edit /
Modify a Job Memory on page 242).
How to Edit / Modify a Job Memory
To edit or modify a job memory:
242
| Page 242 | Jun-21-2021 12:11 |
10
Configuring your Mailing System