quadient iX-5 - Logging in; out as the Supervisor

Logging in / out as the Supervisor10.2
User Settings
The user settings described in the sections below are:
• Setting the display language.
• Adjusting the screen contrast.
• Enabling/disabling key beeps and warning/error beeps.
Supervisor Settings
Your Mailing System has one supervisor PIN code that allows you to configure the
default settings and perform other functions such as managing accounts and access
rights, generating certain reports, etc.
The Supervisor PIN code of the system has been provided to
your organisation in a separate distribution.
The supervisor settings allow you to:
• Change the default user settings
• Modify system time-outs
• Set credit warnings (high amounts, low credit) and activate a crediting PIN code
• Define a default weighing method for mailing, and calibrate the weighing devices
• Design a default imprint (rate, ERA, slogan), activate the Automatic Date Advance
function and set a default printing offset
• Activate sealing mode as default setting
• Enter connection parameters.
206
| Page 206 | Jun-21-2021 12:11 |
10
Configuring your Mailing System