quadient iX-5 User Manual

8. Push down on the upper drive assembly until it locks back into position.
How to Fill the Sealer Bottle
The Automatic Feeder uses water for sealing envelopes.
If the system is out of water, the mailing process continues but the envelopes will not
sealed properly.
To add water (or sealing solution) to the bottle:
1. Remove the bottle from its base and turn it over.
2. Unscrew the cap and fill the bottle with water up to the limit marks.
3. Screw the cap back and put the bottle back into place.
290
| Page 290 | Jun-21-2021 12:11 |
12
Maintaining your Mailing System

quadient iX-5 Specifications

General

Connectivity	Ethernet, USB
Print Technology	Inkjet
Processing Speed	Up to 15, 000 letters per hour
Weighing Platform	Integrated weighing platform
Envelope Feeding	Automatic envelope feeding
Display	Touchscreen display
Technology	Inkjet
Speed	Up to 15, 000 letters per hour
Maximum Print Width	2"
Media Types	Envelopes, labels