quadient iX-5 - How to Add or Delete Ppis

Adding or Deleting PPI's
You can add PPI's to the machine using a USB memory key as follows.
How to Add or Delete PPI's
To add a PPI:
1. Display the list of PPI's (see How to Display the List of PPI's on page 275).
2. Select Add new and connect the memory device to a USB port of the machine (on
your left hand side at the rear of the base: see Connectors on page 23).
3. Press [OK]. The USB memory key content is displayed.
4. Select a PPI to load into the machine an press [OK].
The PPI list is updated with the new PPI.
To delete a PPI:
1. Select the PPI to delete and press [OK].
2.
Confirm deletion, otherwise press .
The system updates the PPI list.
276
| Page 276 | Jun-21-2021 12:11 |
11
Options and Updates