quadient iX-5 - How to Set the Low-Credit Threshold

How to Set the Low-Credit Threshold
A Low Credit Threshold warning warns the user that the credit
remaining in the PSD (Meter) are getting low. More credit should
be loaded. The Low Credit Value Warning can be set to any
value in pounds.
To set a low-credit threshold:
1. As supervisor (see How to Log in as Supervisor on page 207):
From the main menu, select the path: Default user settings Credit settings
2. Select the Low credit threshold field.
Enter the low-credit warning amount or press [C].
If you enter 0, a message is displayed: "Zero amount not
allowed."
3. Press [OK] to validate.
218
| Page 218 | Jun-21-2021 12:11 |
10
Configuring your Mailing System