1. As supervisor (see How to Log in as Supervisor on page 207):
From the main menu, select the path: Maintenance Cartridge Ink cartridge
alignment
The Ink cartridge alignment screen is displayed.
2. Press Perform an imprint test and put a piece of paper in the mail transport.
The system prints a test pattern.
3. Check the printed pattern and press the letter that corresponds to the straightest
and complete vertical line.
4. Press [OK] to validate.
5. Repeat the previous step until lines F are aligned.
286
| Page 286 | Jun-21-2021 12:11 |
12
Maintaining your Mailing System
To Next Page
Loading...
