2. Check or change the type of imprint, if you are not in [Pass Through] mode.
Press to access the imprint screen:
To change the type of imprint, select Imprint type and then select [Pass through]
in the Type of imprint screen. For more details, see How to Change the Current
'Type of Imprint' on page 37.
3.
Press to return to the home screen.
If you want to seal envelopes without printing you must turn
the sealer lever on: see Using the Sealing Function on page 88
On the [Pass Through] home screen:
1.
Press . System motors start running.
2. Insert the mail piece(s) into the mail path against the rear-guide wall.
3. The Mailing System does not apply postage and the envelope is ejected.
56
| Page 56 | Jun-21-2021 12:11 |
3
Processing Mail
To Next Page
Loading...
