QUANTA STRATOS S210 Series S210-X12RS - SATA Controller Screen

BIOS ADVANCED SCREEN
3-18
SATA Controller Screen
The ATA Controller screen provides fields to configure SATA
hard disk drives. It also provides information on the hard disk
drives that are installed.
Figure 3-11. ATA Controller Configuration Screen
Version 2.14.1219 - Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
M
ain
Advanced Ch
i
pse
t
Se
rv
e
r Mgm
t
B
oot
Secur
i
ty
Sa
v
e
&
Ex
it
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: Genenal Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
SATA Configuration
SATA Mode
SATA Port0
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
[AHCI Mode]
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
(1) AHCI Mode. (2) RAID Mode.
Table 3-13: ATA Controller Configuration Fields
S
ETUP ITEM OPTIONS HELP TEXT COMMENTS
SATA Mode
[Disabled]
[AHCI Mode]
[RAID Mode]
(1) AHCI Mode.
(2) RAID Mode.
Select SATA
Type for onboard
SATA ports.
SATA Port0
Information only.
Displays the
device on Port0.
SATA Port1
Information only.
Displays the
device on Port1.
SATA Port2
Information only.
Displays the
device on Port2.
SATA Port3
Information only.
Displays the
device on Port3.
SATA Port4
Information only.
Displays the
device on Port4.
SATA Port5
Information only.
Displays the
device on Port5.