QUANTA STRATOS S210 Series S210-X12RS - Leds

BMC FRONT PANEL USER INTERFACE
4-2
turn the LED on (blinking). If the LED is on, a button press or
IPMI Chassis Identify command will turn the LED off.
LEDs
The following table contains information on Status, ID and
Heartbeat LED's.
The following table contains information on Status LED when
amber blinking.
Table 4-1: Status LED, ID LED, and Heartbeat LED
LED
S COLOR STATUS DESCRIPTION
Power /
Status LED
Amber (Status
LED)
Blinking
System Event
(See following
Status LED table.)
Off Normal status
Green
(Power LED
controlled by BIOS)
On Power On
Off Power Off
ID LED Blue
Off Normal status
Blinking
Identify the system
with interval
Solid ON Identify the system
Heartbeat
LED
Green
Off BMC is not Ready
Blinking BMC is Ready
Table 4-2: Status LED Activity
N
O.
S
TATUS LED
A
CTIVITY
DESCRIPTION
1. Temperature Sensor Non-critical / critical event asserted
2 Fan Sensors Non-critical / critical event asserted
3 Voltage Sensors State asserted
4 Power Supply State asserted
5. Processor Thermal trip
6 Event Logging Disable
 SEL almost full
 SEL full
7 Post Error System firmware error
8Memory
 Correctable EEC error
 Uncorrectable ECC error
 Correctable ECC error logging
limit reached
9. PCIe Bus
 Bus correctable error
 Bus uncorrectable error
 Bus fatal error
10 BMC Watchdog
 Timer expired
 Hard Reset
 Power Down
 Power cycle