CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-44
‘.
SMTP
Simple Mail Transfer Protocol (SMTP) is an Internet standard
for electronic mail (e-mail) transmission across Internet Proto-
col (IP) networks.
Using MegaRAC GUI, you can configure the SMTP settings of
the device.
To open SMTP Settings page, click Configuration > SMTP
from the main menu. A sample screenshot of SMTP Settings
Page is shown in the screenshot below.
Figure 4-34. SMTP Settings Page
The fields of SMTP Settings Page are explained below.
If we choose more than one virtual CDROMs, then the RHEL5
host displays only one CDROM in the “Computer” window.
When we redirect second CDROM, the second CDROM
device will appear in “Computer” window.
If we choose more than 2 virtual Hard disks, then the RHEL5
host displays only two hard disks in “Computer” window. When
we redirect third hard disk, the third hard disk will appear in
“Computer” window
Table 4-29: SMTP Settings Page
I
TEM DESCRIPTION
LAN Channel Number Displays the list of LAN channels available.
Sender Address The 'Sender Address' valid on the SMTP Server.
Machine Name
The 'Machine Name' of the SMTP Server.
Machine Name is a string of maximum 15
alpha-numeric characters.
Space, special characters are not allowed.
To Next Page
Loading...
