QUANTA STRATOS S210 Series S210-X12RS - Processors; Removing a Processor

INSTALLING HARDWARE PROCESSORS
2-16
2.7 Processors
Removing a Processor
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. Carefully press down and outwards on the right processor
locking lever to release it.
Figure 2-22. Releasing the Right Locking Lever
2. Carefully press down and outwards on the left processor
locking lever, pulling it fully open.
WARNING!
The processor remains hot after the system has been
powered down. Allow sufficient time to cool before handling
system components.
!
CAUTION!
DO NOT TRY TO PULL THE RIGHT-HAND PROCESSOR LOCKING
LEVER FULLY OPEN.
!