QUANTA STRATOS S210 Series S210-X12RS - Processor Heat Sinks; Removing a Heat Sink

INSTALLING HARDWARE PROCESSOR HEAT SINKS
2-14
2.6 Processor Heat Sinks
Removing a Heat Sink
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. In a sequential order, loosen the four captive screws
securing the heat sink to the mainboard.
Figure 2-20. Removing the Heat Sink
2. Remove the heat sink.
WARNING!
The heat sink remains hot after the system has been powered
down. Allow sufficient time to cool before handling system
components.
!
1
3
4
2