QUANTA STRATOS S210 Series S210-X12RS - Installing a Processor

INSTALLING HARDWARE INSTALLING A PROCESSOR
2-18
Figure 2-25. Removing the Processor
Installing a Processor
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
Remove the CPU heat sink. See Removing a Heat Sink
on page 2-14.
1. Align the gold triangle identifying pin 1 of the processor
with the triangular cutout of the processor, and the four (4)
indents on processor with the four (4) tabs on socket.
Figure 2-26. Installing the Processor
Indent
Pin 1
Tab