QUANTA STRATOS S210 Series S210-X12RS - Page 57

INSTALLING HARDWARE INSTALLING A PROCESSOR
2-19
2. Insert the processor into the socket, ensuring the four
keys on the socket fit into the corresponding keys on the
processor.
3. Lower the processor load plate over the processor
.
Figure 2-27. Closing the Processor Cover
4. Push the left processor locking lever down and latch it
into the locked position . The protective plastic cover
pops out as the latch is engaged.
5. Push the right processor locking lever down and latch it
into the locked position .
WARNING!
The processor should fit easily into the socket. Do
not force the processor in place.
Note:
Use the socket cover to protect the socket when the socket is
empty.
!


