INSTALLING HARDWARE INSTALLING A 2.5” HARD DRIVE
2-5
4. Remove the four (4) screws securing the hard drive to the
HDD tray.
Figure 2-5. Removing a 2.5” HDD from the Tray
Installing a 2.5” Hard Drive
1. Align the 2.5” hard drive tray with the new hard drive and
secure with the four (4) screws
Figure 2-6. Installing a 2.5” HDD on the Tray
2. Align the tray assembly with the HDD bay and insert the
assembly until it is fully seated in the bay.
To Next Page
Loading...
