CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-31
The fields of Mouse Mode Settings page are explained below.
Procedure:
1. Choose either of the following as your requirement:
Set Mode to Absolute
Set Mode to Relative
2. Click Save button to save the changes made.
3. Click Reset to reset the modified changes.
Network
In MegaRAC GUI, the Network Settings Page is used to config-
ure the network settings for the available LAN channels.
To open Network Settings page, click Configuration > Net-
work from the main menu. A sample screenshot of Network
Settings Page is shown in the screenshot below.
Figure 4-23. Network Settings Page
The fields of Network Settings page are explained below.
Table 4-22: Mouse Mode Settings Page
I
TEM DESCRIPTION
Absolute Mode
The absolute position of the local mouse is sent
to the server.
Relative Mode
Relative mode sends the calculated relative
mouse position displacement to the server.
Save To save any changes made.
Reset To Reset the modified changes.
To Next Page
Loading...
