QUANTA STRATOS S210 Series S210-X12RS - Removing a 3.5 Hard Drive

INSTALLING HARDWARE REMOVING A 3.5” HARD DRIVE
2-6
Figure 2-7. Installing a 2.5” HDD in the System
3. Close the HDD tray handle.
Removing a 3.5” Hard Drive
1. Press the tray handle button.
Figure 2-8. Opening the Hard Drive Tray Handle
2. Pull the hard drive tray handle completely open.
Figure 2-9. Removing the 3.5” Hard Drive Tray
WARNING!
Do not force the tray handle closed. If resistance is
encountered check the hard drive is properly inserted and the
hard drives on either side are properly inserted.


!

