CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-61
1. Click Video Record > Settings to open the settings page
as shown in the screenshot below.
Figure 4-46. Video Record Settings Page
2. Enter the Video Length in seconds.
3. Browse and enter the location where you want the video
to be saved.
4. Enable the option Normalized video resolution to
1024X768.
5. Click OK to save the entries and return to the Console
Redirection screen.
6. Click Cancel if you don’t wish to save the entries.
7. In the Console Redirection window, click Video Record >
Start Record.
8. Record the process.
9. To stop the recording, click Video Record > Stop
Record.
Power
The power option is to perform any power cycle operation. Click
on the required option to perform the following operation.
Reset Server: To reboot the system without powering off (warm
boot).
Active Users
Click this option to displays the active users and their system IP
address.
Help
Jviewer: Displays the copyright and version information
Table 4-42: Power
I
TEM DESCRIPTION
Power Off Server -
Immediate
To immediately power off the server.
Power Off Server -
Orderly Shutdown
To initiate operating system shutdown prior to
the shutdown.
Power On Server To power on the server.
Power Cycle Server
To first power off, and then reboot the system
(cold boot).
To Next Page
Loading...
