QUANTA STRATOS S210 Series S210-X12RS - Installing the Pcie Expansion Card

INSTALLING HARDWARE INSTALLING THE PCIE EXPANSION CARD
2-28
Installing the PCIe Expansion Card
Prerequisite:
Prerequisite:
Remove the PCIe riser assembly. See Removing the
PCIe Riser Assembly on page 2-25
1. Align the PCIe expansion card with the connector on
riser.
Figure 2-37. Installing the PCIe Expansion Card (1 of 2)
2. Connect the PCIe expansion card to the riser.
3. Secure the PCIe card to the riser with one (1) screw.
Figure 2-38. Installing the PCIe Expansion Card (2 of 2)