QUANTA STRATOS S210 Series S210-X12RS - Installing the HDD Backplane (2.5 HDD W;O Expander SKU)

INSTALLING HARDWARE INSTALLING THE HDD BACKPLANE (2.5” HDD W/O EXPANDER SKU)
2-58
8. Remove the backplane from the chassis.
Figure 2-86. Removing the 2.5” HDD Backplane
Installing the HDD Backplane (2.5”
HDD w/o Expander SKU)
Prerequisite:
Prerequisite:
Remove the HDDs. See Removing a 2.5” Hard Drive on
page 2-4.
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. Align the HDD backplane with the screw holes in the
chassis.
Figure 2-87. Aligning the 2.5” HDD Backplane