QUANTA STRATOS S210 Series S210-X12RS - Pcie Riser Assembly; Removing the Pcie Riser Assembly

INSTALLING HARDWARE PCIE RISER ASSEMBLY
2-25
2.9 PCIe Riser Assembly
Removing the PCIe Riser Assembly
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. Remove one (1) screw from the chassis.
Figure 2-31. Removing the PCIe Riser Assembly (1 of 2)
2. Pull the assembly out of the chassis.
Figure 2-32. Removing the PCIe Riser Assembly (2 of 2)