CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-62
Quick Buttons
The lower right of Console Redirection windows displays all the
quick buttons. These quick buttons helps you to perform these
functions by just clicking them.
Server Power Control
This page allows you to view and control the power of your
server.
To open Power Control and Status page, click Remote Control
> Server Power Control from the main menu. A sample
screenshot of Power Control and Status page is shown in the
screenshot below.
Figure 4-47. Power Control and Status Page
The various options of Power Control are given below.
Procedure:
Select an action and click Perform Action to proceed with the
selected action.
This option is available only when you launch the Java Console.
Server Power Control.
Table 4-43: Server Power Control
I
TEM DESCRIPTION
Reset Server
This option will reboot the system without
powering off (warm boot).
Power Off Server –
Immediate
This option will immediately power off the server.
Power Off Server –
Orderly Shutdown
This option will initiate operating system
shutdown prior to the shutdown.
Power On Server This option will power on the server.
Power Cycle Server
This option will first power off, and then reboot
the system (cold boot).
Perform Action
Click this option to perform the selected
operation.
You will be asked to confirm your choice. Upon confirmation, the
command will be executed and you will be informed of the status.
To Next Page
Loading...
