INSTALLING HARDWARE HARD DISK DRIVES
2-4
2.3 Hard Disk Drives
The following procedures demonstrate installation and removal of 2.5 and 3.5 inch hard drives.
Removing a 2.5” Hard Drive
1. Press the tray handle button.
Figure 2-3. Opening the Hard Drive Tray Handle
2. Pull the HDD tray handle open.
Figure 2-4. Removing a 2.5” Hard Drive Tray
3. Remove the tray out of the system.
Repairs should be perfomed by a certified service technician. Damage to the system or components due to unauthorized servicing
is not covered by the warranty agreement.
To Next Page
Loading...
