QUANTA STRATOS S210 Series S210-X12RS - Installing the Pcie Riser Assembly

INSTALLING HARDWARE INSTALLING THE PCIE RISER ASSEMBLY
2-26
Installing the PCIe Riser Assembly
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. Align the assembly with the guide pin hole in the chassis.
Figure 2-33. Installing the PCIe Riser Assembly (1 of 2)
2. Insert the assembly into the PCIe slots on the mainboard.
3. Secure the assembly to the chassis with one (1) screw.
Figure 2-34. Installing the PCIe Riser Assembly (2 of 2)