QUANTA STRATOS S210 Series S210-X12RS - Installing a SAS 6 G Mezzanine Card

INSTALLING HARDWARE INSTALLING A SAS 6G MEZZANINE CARD
2-33
5. Remove the four (4) screws from the module support
plate.
Figure 2-47. Module Screws
6. Remove the module from the support plate.
Installing a SAS 6G Mezzanine Card
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
Remove the PCIe riser assembly. See Removing the
PCIe Riser Assembly on page 2-25.
Remove memory modules:
CPU 0 C-A DIMM A0 ~ CPU 0 C-A DIMM A2,
CPU 0 C-B DIMM B0 ~ CPU 0 C-B DIMM B2,
CPU 1 C-G DIMM G0 ~ CPU 1 C-G DIMM G2,
CPU 1 C-H DIMM H0 ~ CPU 0 C-H DIMM H2,
See Memory Population Rules on page 2-22 for location.
See Removing a Memory Module on page 2-20.