QUANTA STRATOS S210 Series S210-X12RS - Installing a Memory Module

INSTALLING HARDWARE INSTALLING A MEMORY MODULE
2-21
Figure 2-28. Removing Memory Modules
2. Lift out the memory module.
.
Installing a Memory Module
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. Align the notch on the memory module with the obstruc-
tion on the slot.
Figure 2-29. Installing Memory Modules
2. Push the memory module firmly into the memory module
slot. The locking latches automatically lock in place.
CAUTION!
HANDLE MEMORY MODULES BY THE EDGES AT ALL TIMES.
Slot lever



!
CAUTION!
HANDLE THE MEMORY MODULE BY THE EDGES AT ALL TIMES.
!
Obstruction
Notch