QUANTA STRATOS S210 Series S210-X12RS - Pcie Expansion Card; Removing the Pcie Expansion Card

INSTALLING HARDWARE PCIE EXPANSION CARD
2-27
2.10 PCIe Expansion Card
Removing the PCIe Expansion Card
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
Remove the PCIe riser assembly. See Removing the
PCIe Riser Assembly on page 2-25.
1. Remove one (1) screw from the PCIe expansion card.
Figure 2-35. Removing the PCIe Card (1 of 2)
2. Disconnect the PCIe expansion card from the riser.
Figure 2-36. Removing the PCIe Card (2 of 2)
3. Remove the card from the riser.