QUANTA STRATOS S210 Series S210-X12RS - Fan Module Assembly; Removing Fan Module Assembly

INSTALLING HARDWARE FAN MODULE ASSEMBLY
2-45
2.14 Fan Module Assembly
Removing Fan Module Assembly
Prerequisite:
Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. Disconnect six (6) fan module cables from the connectors
on the HDD backplane.
Figure 2-67. Disconnecting the Fan Assembly Cables
2. Remove four (4) screws securing the fan module assem-
bly to the chassis.
Figure 2-68. Removing the Fan Module Assembly Screws
3. Remove the fan module assembly from the chassis.
4. Repeat steps 2 to 4 to remove the additional fan module
assembly.