QUANTA STRATOS S210 Series S210-X12RS - Installing a 3.5 Hard Drive

INSTALLING HARDWARE INSTALLING A 3.5” HARD DRIVE
2-7
3. Remove the tray from the system.
4. Remove the four (4) screws securing the hard drive to the
HDD tray.
Figure 2-10. Removing a 3.5” HDD from the Tray
Installing a 3.5” Hard Drive
1. Align the 3.5” hard drive tray with the new hard drive and
secure with the four (4) screws
Figure 2-11. Installing a 3.5” HDD on the Tray
WARNING!
Make sure the hard drive tray handle is in the fully open
position.
!