QUANTA STRATOS S210 Series S210-X12RS - BMC Recovery; Recovery Process in DOS System; Recovery Process in Linux System

CHAPTER TITLE BMC RECOVERY
4-5
4.2. BMC Recovery
This section provides guidelines on BMC recovery process in
DOS and Linux systems.
Recovery Process in DOS System
To recover BMC on a DOS system, do as follows:
1. Boot into DOS.
2. Navigate to the Upgrade Utility folder.
3. Run dos.bat.
The BMC recovery is complete.
Recovery Process in Linux Sys-
tem
To recover BMC on a Linux system, do as follows:
1. Boot into Linux.
2. Navigate to the Upgrade Utility folder.
3. Run linux.sh.
The BMC recovery is complete.