CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-43
6. Click Save to save the entered details.
7. Click Reset to reset the entered details.
Remote Session
In MegaRAC SP, use this page to configure virtual media con-
figuration settings for the next redirection session. Encryption is
disabled by default.
To open Remote Session page, click Configuration > Remote
Session from the main menu. A sample screenshot of Remote
Session Page is shown in the screenshot below.
Figure 4-33. Remote Session
The fields of Remote Session Settings Page are explained
below.
Procedure:
1. In KVM encryption, check or uncheck the option Enable.
2. In Media Encryption, check or uncheck the option
Enable.
3. In Virtual media Attach mode, select Auto Attach or
Attach from the dropdown list as required.
4. Click Save to save the entries.
5. Click Reset to reset the entries
Table 4-28: Remote Session Settings Page
I
TEM DESCRIPTION
KVM Encryption
Enable/Disable encryption on KVM data for the
next redirection session.
Media Encryption
Enable/Disable encryption on Media data for the
next redirection session.
Virtual Media Attach
Mode
Two types of VM attach mode are available:
Attach: Immediately attaches Virtual Media to
the server upon bootup.
Auto Attach: Attaches Virtual Media to the
server only when a virtual media session is
started.
Save
To save the current changes.
It will automatically close the existing remote
redirection either KVM or Virtual media sessions,
if any.
Reset To reset the modified changes.
Table 4-28: Remote Session Settings Page (Continued)
I
TEM DESCRIPTION
To Next Page
Loading...
