QUANTA STRATOS S210 Series S210-X12RS - Page 215

CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-42
To open RADIUS Settings page, click Configuration > RADIUS
from the main menu. A sample screenshot of RADIUS Settings
Page is shown in the screenshot below.
Figure 4-32. RADIUS Settings Page
The fields of RADIUS Settings Page are explained below.
Procedure:
1. Enable the RADIUS Authentication checkbox to authen-
ticate the RADIUS.
2. Enter the port number in the Port Number field.
3. Enter the time out value in seconds in the Time out field.
4. Enter the address of the server in the Server Address
field.
5. Enter the authentication secret for RADIUS Server in the
Secret field.
Table 4-27: RADIUS Settings Page
I
TEM DESCRIPTION
RADIUS
Authentication
Option to enable RADIUS authentication.
Port
The RADIUS Port number.
Note:
Default Port is 1812.
Time Out
The Time out value in seconds.
Note:
 Default Timeout value is 3seconds.
 Timeout value ranges from 3 to 300.
Server Address
The IP address of RADIUS server.
Note:
 IP Address made of 4 numbers separated by
dots as in "xxx.xxx.xxx.xxx".
 Each Number ranges from 0 to 255.
 First Number must not be 0.
Secret
The Authentication Secret for RADIUS server.
Note:
 This field will not allow more than 31 charac-
ters.
 Secret must be at least 4 characters long.
 White space is not allowed.
Save To save the settings.
Reset To reset the modified changes.
Table 4-27: RADIUS Settings Page (Continued)
I
TEM DESCRIPTION