CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-47
SOL
Here, you can configure the Serial over LAN settings, select or
change values for each attribute and click the Save button to
save any changes.
Figure 4-36. SOL Settings Page
The fields of SOL Settings Page are explained below.
SSL
The Secure Socket Layer protocol was created by Netscape to
ensure secure transactions between web servers and brows-
ers. The protocol uses a third party, a Certificate Authority (CA),
to identify one end or both end of the transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC.
Using this, the device can be accessed in a secured mode.
To open SSL Certificate Configuration page, click Configura-
tion > SSL from the main menu. There are three tabs on this
page.
Upload SSL option is used to upload the certificate and
private key file into the BMC.
Community String SNMP trap community
Destination IP
The destination IP for trap to send. BMC
provides the 5 destinations.
Table 4-30: SMTP Settings Page (Continued)
I
TEM DESCRIPTION
Table 4-31: SOL Settings Page
I
TEM DESCRIPTION
Enable Serial over
LAN
Checked=Enabled; Unchecked=Disabled.
Channel Privilege
Level Limit
Select the IPMI Serial over LAN minimum user
privilege:
Administrator
Operator
User
Save Use this button to save your settings.
Advanced SOL
Settings
Use this button to go to advanced SOL page.
To Next Page
Loading...
