QUANTA STRATOS S210 Series S210-X12RS - User Management

CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-51
 The Country of the organization
 The email address of the organization.
 The number of days the certificate will be valid in the
Valid For field.
4. Choose the Key Length bit value of the certificate
5. Click Generate to generate the certificate.
6. Click View SSL tab to view the uploaded SSL certificate
in user readable format.
User Management
In MegaRAC GUI, the User Management page allows you to
view the current list of user slots for the server. You can add a
new user and modify or delete the existing users.
To open User Management page, click Configuration > Users
from the main menu. A sample screenshot of User Manage-
ment Page is shown in the screenshot below.
Figure 4-40. User Management
The fields of User Management Page are explained below.
Note:
 Once you Upload/Generate the certificates, only HTTPs ser-
vice will get restarted.
 You can now access your Generic MegaRAC
®
SP securely
using the following format in your IP Address field from your
Internet browser: https://<your MegaRAC
®
SP’s IP address
here>
 For example, if your MegaRAC
®
SP’s IP address is
192.168.0.30, enter the following:
https://192.168.0.30
 Please note the <s> after <http>.You must accept the certifi-
cate before you are able to access your Generic MegaRAC
®
SP.
Table 4-35: User Management Page
I
TEM DESCRIPTION
User ID
Displays the ID number of the user.
Note:
The list contains a maximum of ten users only.
User Name Displays the name of the user.
User Access
To enable or disable the access privilege of the
user.
Network Privilege
Displays the network access privilege of the
user.