CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-52
Procedure:
Add a new user:
1. To add a new user, select a free slot and click Add User.
This opens the Add User screen as shown in the screen-
shot below.
Figure 4-41. Add User Page
2. Enter the name of the user in the User Name field.
3. In the Password and Confirm Password fields, enter
and confirm your new password.
SNMP Status
Displays if the SNMP status for the user is
enabled or Disabled.
Email ID Displays email address of the user.
Add User To add a new user. Modify.
User To modify an existing user.
Delete User To delete an existing user.
The Free slots are denoted by "~" in all columns for the slot.
Table 4-35: User Management Page (Continued)
I
TEM DESCRIPTION
User Name is a string of 4 to 16 alpha-numeric characters.
It must start with an alphabetical character.
It is case-sensitive.
Special characters ','(comma), '.'(period), ':'(colon), ';'(semico-
lon), ' '(space), '/'(slash), '\'(backslash), '('(left bracket) and
')'(right bracket) are not allowed.
To Next Page
Loading...
