QUANTA STRATOS S210 Series S210-X12RS - Mouse Mode

CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-30
To add a new Role Group
8. In the LDAP Settings Page, select a blank row and click
Add Role Group to open the Add Role group Page as
shown in the screenshot below.
Figure 4-21. Add Role group Page
9. In the Role Group Name field, enter the name that identi-
fies the role group.
10.In the Role Group Search Base field, enter the path from
where the role group is located to Base DN.
11.In the Role Group Privilege field, enter the level of privi-
lege to assign to this role group.
12.Click Add to save the new role group and return to the
Role Group List.
13.Click Cancel to cancel the settings and return to the Role
Group List.
To Modify Role Group
14.In the LDAP Settings Page, select the row that you wish
to modify and click Modify Role Group.
15.Make the necessary changes and click Save.
To Delete a Role Group
16.In the LDAP Settings Page, select the row that you wish
to delete and click Delete Role Group.
Mouse Mode
In MegaRAC GUI, Redirection Console handles mouse emula-
tion from local window to remote screen in either of two meth-
ods. User has to be an Administrator to configure this option.
To open Mouse Mode page, click Configuration > Mouse
Mode from the main menu. A sample screenshot of Mouse
Mode Settings Page is shown in the screenshot below.
Figure 4-22. Mouse Mode Settings Page
Note:
 Role Group Name is a string of 255 alpha-numeric characters.
 Special symbols hyphen and underscore are allowed.
Note:
 Search Base is a string of 255 alpha-numeric characters.
 Special symbols hyphen, underscore and dot are allowed.