QUANTA STRATOS S210 Series S210-X12RS - Page 202

CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-29
Procedure:
Entering the details in Advanced LDAP Settings Page
1. In the LDAP Settings Page, click Advanced Settings. A
sample screenshot of LDAP Settings page is given below.
Figure 4-20. Advanced LDAP Settings
2. To enable/disable LDAP Authentication, check or
uncheck the Enable checkbox respectively.
3. Enter the IP address of LDAP server in the IP Address
field.
4. Specify the LDAP Port in the Port field.
5. Enter the Search Base. The Search base tells the LDAP
server which part of the external directory tree to search.
The search base may be something equivalent to the
organization, group of external directory.
6. Click Save to save the settings.
7. Click Cancel to cancel the modified changes.
Note:
At login prompt, enter username to login as an LDAP group mem-
ber.
Note:
 IP Address made of 4 numbers separated by dots as in
'xxx.xxx.xxx.xxx'.
 Each Number ranges from 0 to 255.
 First Number must not be 0.
 Supports IPv4 Address format and IPv6 Address format.
Note:
Default Port is 389. For Secure connection, default port is 636.
Note:
 Searchbase is a string of 4 to 63 alpha-numeric characters.
 It must start with an alphabetical character.
 Special Symbols like dot(.), comma(,), hyphen(-), under-
score(_), equal-to(=) are allowed.
 Example: ou=login,dc=domain,dc=com