QUANTA STRATOS S210 Series S210-X12RS - Page 62

INSTALLING HARDWARE MEMORY POPULATION RULES
2-24
a*: Supported and Validated
1*: Physical Rank is used to calculate DIMM Capacity.
2*: Supported and validated DRAM Densities are 2Gb and 4Gb.
3*: Command Address Timing is 1N.
4*: The speeds are estimated targets and will be verified through simulation.
5*: QR: For 3DPC – Rank Multiplication (RM) = 2
8R: For 2DPC and 3DPC – Rank Multiplication (RM) = 4
6*: QDP – Quad Die Package DRAM stacking.
DDP – Dual Die Package DRAM stacking.
P – Planer monolithic DRAM Die.
Important:
a*: Supported but not validated.
b*: Supported and validated.
c*: Supported with limited validation
Note:
1*: Supported DRAM densities are 1Gb, 2Gb, and 4 Gb. Only
2 Gb and 4 Gb are validated by Intel.
2*: Command Address Timing is 1N.
3*: QR RDIMM are supported but only validated by Intel/PMO in a
homogenous environment. The coverage will have limited system
level testing, no signal integrity testing, and no interoperability testing
The passing QR RDIMMs will be web posted.
Table 2-2: LR-DIMM Support (Reduced Length)
R
ANKS PER
DIMM &
DATA WIDTH
MEMORY
CAPACITY PER
DIMM (GB)
1, 2*
SPEED (MT/S) & VOLTAGE VALIDATED BY SLOT PER CHANNEL (SPC) & DIMM PER CHANNEL (DPC)
3,4,5*
1 Slot per
Channel
2 Slots per Channel 3 Slots per Channel
1 DPC (V) 1 DPC (V) 2 DPC (V) 1DPC (V) 2DPC (V) 3DPC (V)
1.35 1.5 1.35 1.5 1.35 1.5 1.35 1.5 1.35 1.5 1.35 1.5
QR x 4
(DDP)
6
*
16
a*
32
a*
1066,
1333,
1600
1066,
1333,
1600,
1866
1066,
1333,
1600
1066,
1333,
1600,
1866
1066,
1333,
1600
1066,
1333,
1600,
1066,
1333,
1600
1066,
1333,
1600,
1866
1066,
1333,
1600
1066,
1333,
1600
1066 1066
8R x 4
(QDP)
6*
32
a*
64
a*
1066 1066 1066 1066 1066 1066 1066 1066 1066 1066 1066 1066