QUANTA STRATOS S210 Series S210-X12RS - Page 55

INSTALLING HARDWARE REMOVING A PROCESSOR
2-17
Figure 2-23. Releasing the Left Processor Locking Lever
3. Press down on the right processor locking lever to lift the
processor cover part way and then lift the processor load
plate to the fully open position.
Figure 2-24. Opening the Processor Cover
4. Lift the processor out of the socket.
CAUTION!
THE LOCKING LEVER IS HELD UNDER CONSIDERABLE FORCE AND
MAY SPRING UP UNEXPECTEDLY.
!
CAUTION!
AVOID CONTACT WITH THERMAL GREASE ON THE PROCESSOR.
!