QUANTA STRATOS S210 Series S210-X12RS - Page 218

CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-45
Procedure:
1. Select the LAN Channel Number from the dropdown list.
2. Enter the Sender Address in the specified field.
3. Enter the Machine Name in the specified field.
Primary SMTP Server Lists the Primary SMTP Server configuration.
Server Address
The 'IP address' of the SMTP Server. It is a
mandatory field.
Note:
 IP Address made of 4 numbers separated by
dots as in "xxx.xxx. xxx.xxx".
 Each Number ranges from 0 to 255.
 First Number must not be 0.
 Supports IPv4 Address format and IPv6
Address format.
SMTP Server
requires
Authentication
To enable/disable SMTP Authentication.
Note:
SMTP Server Authentication Types supported
are:
 CRAM-MD5
 LOGIN
 PLAIN
If the SMTP server does not support any one of
the above authentication types, the user will get
an error message stating, "Authentication type is
not supported by SMTP Server"
Table 4-29: SMTP Settings Page (Continued)
I
TEM DESCRIPTION
Username
The username to access SMTP Accounts.
Note:
 User Name can be of length 4 to 64 alpha-
numeric characters.
 It must start with an alphabet.
 Special characters ','(comma), ':'(colon),
';'(semicolon), ' '(space) and '\'(backslash) are
not allowed.
Password
The password for the SMTP User Account.
Note:
 Password must be at least 4 characters long.
 White space is not allowed.
 This field will not allow more than 64 charac-
ters.
Secondary SMTP
Server
It lists the Secondary SMTP Server
configuration. It is an optional field. If the Primary
SMTP server is not working fine, then it tries with
Secondary SMTP Server configuration.
Save To save the new SMTP server configuration.
Reset To reset the modified changes.
Table 4-29: SMTP Settings Page (Continued)
I
TEM DESCRIPTION