QUANTA STRATOS S210 Series S210-X12RS - Page 134

BIOS ADVANCED SCREEN
3-30
Internet
Protocol
IP4]
[ I P 6 ]
[Autoconfigure
]
Initiator IP address is
system assigned in IP6
mode. In Autoconfigure
mode, iSCSI driver will
attempt to connect
iSCSI target via IPv4
stack, if failed then
attempt IPv6 stack
Connect Retry
Count
The minimum value is 0
and the maximum is
16. 0 means no retry
Connection
Establishing
Time out
The timeout value in
milliseconds. The
minimum value is 100
milliseconds and the
maximum is 20
seconds.
OUI-format
ISID
Information
only.
Display
MAC
Address.
Configure ISID
OUI-format ISID in
6bytes, default value
are derived from MAC
address. Only last 3
bytes are configurable.
Example:update
0ABBCCDDEEFF to
0ABBCCF07900 by
input F07901
Table 3-24: Console Redirection Settings Fields (Continued)
S
ETUP ITEM OPTIONS HELP TEXT COMMENTS
Enable DHCP
[Disabled]
[Enabled]
Enable DHCP
Initiator IP
address
Enter IP address in
dotted-decimal notation
Initiator
Subnet Mask
Enter IP address in
dotted-decimal notation
Gateway
Enter IP address in
dotted-decimal notation
Target Name
The worldwide unique
name of iSCSI Initator.
Only IQN format is
accepted.
Tar ge t I P
address
Enter IP address in
dotted-decimal notation
Target IP Port Target IP Port
Boot LUN
Hexadecimal
representation of the
LU number. Examples
are : 4752-3A4F-6b7e-
2F99, 6734-9-156f-127,
4186-9
Authentication
Type
[Chap]
[None]
Authentication method:
CHAP, Kerberos, or
None
CHAP Type
[One way]
[Mutual]
None, One way CHAP
or Mutual CHAP
Table 3-24: Console Redirection Settings Fields (Continued)
S
ETUP ITEM OPTIONS HELP TEXT COMMENTS