QUANTA STRATOS S210 Series S210-X12RS - Page 148

BIOS SERVER MANAGEMENT SCREEN
3-44
BMC LAN Port
State
Information only.
Displays the
BMC LAN Port
State.
Configuration
Address
source
[Static on next
reset]
[Dynamic-
obtain by
BMC]
[Do Nothing]
Select to
configure LAN
channel
parameters
statically or
dynamically
(DHCP). Do
nothing option
will not modify
any BMC network
parameters
during BIOS
phase.
IP address
source
Information only.
Displays the IP
address source.
Station IP
address
Enter station IP
address
Available if
Configuration
Address is static
on next reset.
Subnet mask
Enter subnet
mask
Available if
Configuration
Address is static
on next reset.
Table 3-35: BMC Network Configuration Fields (Continued)
S
ETUP ITEM OPTIONS HELP TEXT COMMENTS
Station MAC
address
Information only.
Displays the
Station MAC
address.
Router IP
address
Enter Router IP
address
Available if
Configuration
Address is static
on next reset.
IPv6 Mode
[Disabled]
[Enabled]
[No Change]
Disabled/Enabled
IPv6 BMC LAN
channel function.
Disable option
will not modify
any BMC network
during BIOS
Phase.
IPv6
AutoConfig
[Unspecified]
[Static]
[Dynamic-
Obtained by
BMC running
DHCP]
Select to
configure LAN
channel
parameter
statically or
dynamically (by
BIOS or BMC)
Options only
show when "IPv6
Mode" =
[Enabled]
IPv6 IP
Address
Enter IPv6 BMC
LAN IP address
Options only
show when "IPv6
Mode" =
[Enabled] and
"IPv6
AutoConfig" =
[Disabled]
Table 3-35: BMC Network Configuration Fields (Continued)
S
ETUP ITEM OPTIONS HELP TEXT COMMENTS