CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-26
To open DNS Server Settings page, click Configuration > DNS
from the main menu. A sample screenshot of DNS Server Set-
tings Page is shown in the screenshot below.
Figure 4-18. DNS Server Settings Page
The fields of DNS Server Settings page are explained below.
Table 4-20: DNS Server Settings Page
I
TEM DESCRIPTION
Host configuration
Host Settings Choose either Automatic or Manual settings.
Host Name
It displays hostname of the device. If the Host
setting is chosen as Manual, then specify the
hostname of the device.
Domain Name Configuration
Domain Settings
It lists the option for domain interface as Manual,
v4 or v6 for multiLAN channels.
If you choose DHCP, then select v4 or v6 for
DHCP servers.
Domain Name
It displays the domain name of the device. If the
Domain setting is chosen as Manual, then
specify the domain name of the device. If you
chose Automatic, the Domain Name cannot be
configured as it will be done automatically. The
field will be disabled.
IPv4 Domain Name Server Configuration
DNS Server Settings:
It lists the option for v4 DNS settings for the
device, Manual and available LAN interfaces.
Preferred DNS Server
The DNS (Domain Name System) server v4
address to be configured to the device.
IP Address made of 4 numbers separated by
dots as in "xxx.xxx.xxx.xxx".
Each number ranges from 0 to 255.
First number must not be 0.
Alternate DNS Server
IPv6 Domain Name Server Configuration
Table 4-20: DNS Server Settings Page (Continued)
I
TEM DESCRIPTION
To Next Page
Loading...
